Main > Main Forum

wiring I-PAC2 for an esc button

(1/2) > >>

shorething:
I have everything wired, except the esc key.

I have 6 buttons per player, so they are wired to the position 1-6 on my I =PAC 2.

I have 2 open spots on each side of the I-PAC 2 (positons 7 & 8)

Where should I wire my esc button?
Do I just do it to 7 or 8 and adjust it using the software?

Or is there a default on the I pac for esc (without shifting)?
What is the default shifting combination for esc?


Thanks!

Bgnome:
shifted player 2 start is the default for esc

shorething:
I hate to sound like a putz...

but what do I press along with player 2 to get the shifted
esc to work?

:)

Bgnome:
you must hold down player 1 start, which is the default shift key, to gain access to the shifted functions.  and if you wanted to sound less like a putz, you could always try reading the manual ;)

IncrdblHulk7:
I beleive that Player1 doubles as the Shift key on the default IPAC settings

Navigation

[0] Message Index

[#] Next page

Go to full version