Main > Main Forum
Monitor Glass/Bezel Mounting Questions
Iori:
What do you all use to mount the glass cover and bezels for your monitors? I have an idea of what I think I would like to use on mine, but I am not sure if it even exists. What I have been thinking is finding something similar to a marquee retainer along the top edge of where the glass will be mounted, then sliding the glass into the lip of this and mounting holders to hold up the lower part of the glass that would be underneath the control panel...
Any pictures of different methods of mounting glass in an upright cab or comments on how I am considering doing this would be appreciated. (Or links to other similar topics, searched, but didn't find anything) Thanks! ;D
RayB:
Most have wood slats along each side, and along the top, and bottom, with the bottom one having a lip that's tall enough to match the thickness of the glass. This is the easiest method for glass that's laying at 65' angle or less...
Flinkly:
sorry about having no input, but i would love to hear this one too. i bought an arcade monitor and a bezel from the same company, and have kept this question in the back of my mind, since i haven't progressed far enough to worry about it in my cab yet...so smother on some answers please everyone. pics would be great too.
Iori:
Thanks, that makes sense. I will be mounting my monitor at a very non extreme angle, not sure what it is, but it will be more like 80 degrees, maybe less than that. Anyone have other methods that they are using or know of any good examples I should take a look at? Seems like there aren't many sources that show how they do this part of the cab making, maybe it is time that I head out to the hardware store and see if I can find the things that I could use for the idea that I have there... (but would still love to see what others are doing/hear about some other methods ideas :) )
Iori:
Here is something like I was thinking for the lower pieces to hold the glass in:
http://www.vandykes.com/product/02362250/
Note that these would be underneath the CP and would not be visible (unless the CP was open). Still haven't found anything along the lines of what I was thinking for the upper part, but still looking... :D
Navigation
[0] Message Index
[#] Next page
Go to full version