Main > Main Forum

Those with 4-way Wico leafs

<< < (2/2)

RayB:
Geez, the spring is what makes it "hold" tightly and thus not wobble.

Agent Davis:
Well, without a router i needed it to come up above the panel as much as possible.  I'll put the spring back when I can route it out

Bgnome:
you can also get good results by using a chisel if you are working with mdf

Kremmit:
Somebody else asked this a while back, and it was suggested (as a joke) that he get the handle & grommet wet and let 'em rust together.  I've got one that is rusted up like that, and it definately does not spin! ;D   It also definately will not come apart! :(

I'm not suggesting you intentionally rust your stick, but you might shoot some glue in between the grommet and handle.  Don't use anything really strong, or you won't ever thet the thing apart again, but if you use some cheap glue that you could break the bond if you pulled hard enough, that might do the job.

Navigation

[0] Message Index

[*] Previous page

Go to full version