Main > Main Forum
Angle degree of control panel
dagimp69sme:
Whatsup all,
I'm building a 4 player cab, and I've already built the frame. However, I'm sorta stuck on the control panel... My control panel will be about 4 feet long, but I'm not sure as to what angle the panel should attach to the cabinet frame. I'm just wondering as to how others figured out the angle the support boards under the control panel were placed at?
Thanks,
Ryan
cdbrown:
Hey,
I've built a 4player machine and iirc I got the slope of the panel from an nba jam cab or something similar. If you check out my site there are plans in cad for download which show the control panel box.
Cheers
-cdbrown
Minwah:
I think mine is ~10 degrees - this is fairly common I believe. If you are tall I would recommend as little slant as possible, to help reduce pains in the wrists!
versapak:
I dunno what the actual angle of mine is in degrees, but it is 1" higher in the rear.
KrawDaddy:
Mine is set at 4.5 degrees.
Navigation
[0] Message Index
[#] Next page
Go to full version