Main > Main Forum
What's the best way to make leaf switches better?
Stingray:
Brown paper bags work well for cleaning the contacts on leafs too.
-S
MonitorGuru:
--- Quote from: RayB on September 12, 2004, 11:37:23 am ---What about a light sanding of the little round contact points on the leaf switches?
--- End quote ---
You obviously didn't read my post above:
--- Quote ---Electronic contact cleaner plus a super fine grained (200 or better) sand paper or "000" or "0000" steel wool should be used on the contacts to clean them off. Dont use cheap nail files, they will remove most of the metal and leave gouges that will have multiple burrs that can cause intermittency in contacts. Non abrasive is best, or very very fine abrasives otherwise.
--- End quote ---
JackTucky:
thanks for all of the suggestions. there are about 30 switches for the pins.
Art
Navigation
[0] Message Index
[*] Previous page
Go to full version