Main > Main Forum
Where to get wire harness for Mini-Pac
Searcher7:
--- Quote from: microwrx on August 30, 2004, 04:01:11 am ---Alternatively you could get a terminal block/strip, wire the IDE cable you have to one side and the button/stick wiring to the other side just like on an I-PAC.
--- End quote ---
A someone elaborate on what a "terminal block/strip" is, and where to get one?
Thanks.
Darren
miles2912:
--- Quote from: Searcher7 on July 24, 2006, 11:30:54 am ---
--- Quote from: microwrx on August 30, 2004, 04:01:11 am ---Alternatively you could get a terminal block/strip, wire the IDE cable you have to one side and the button/stick wiring to the other side just like on an I-PAC.
--- End quote ---
A someone elaborate on what a "terminal block/strip" is, and where to get one?
Thanks.
Darren
--- End quote ---
Here is a link to one at radio shack
http://www.radioshack.com/product/index.jsp?productId=2103229&cp=&origkw=barrier&kw=barrier&parentPage=search
You can see my minipac just below the trackball and the barrier blocks to the left and right of it. They worked out great.
D-
Navigation
[0] Message Index
[*] Previous page
Go to full version