Main > Main Forum
Wico leaf buttons - followup
ericball:
As noted in my previous posts Mounting leaf buttons in wood and Any good Wico experiences? I ordered some leaf buttons from Wico. I now have them in my posession and can give some details.
The buttons are 1 3/4" long with a 7/8" thread, so I think they qualify as long buttons. The leaf holder (black, though the order slip indicated white) has a 1" diameter 1/8" high spacer. But if the spacer is set in the hole (3/4" wood) then the bottom of the plunger just rests against the leaf switch.
RayB:
OK
FractalWalk:
But if the spacer is set in the hole (3/4" wood) then the bottom of the plunger just rests against the leaf switch.
I had the same issue. You're going to have to make yourself some spacers. I used washers and it worked for me.
FractalWalk:
The buttons are 1 3/4" long with a 7/8" thread
I think those are the short ones. The long ones are supposed to be 2".
ericball:
Just a picture of the button (not pressed) mounted in 3/4" wood (1 1/8" hole).
Navigation
[0] Message Index
[#] Next page
Go to full version