Main > Main Forum
Cleaning surface after painting/sanding
(1/1)
Sylentwulf:
OK, before priming, and after sanding in between coats, how do I clean the surface? Shopvac, towel? Some is MDF so I don't want to wipe with any kind of liquid...
Thanx!
Heartburn:
Tackcloth might work. It's a sticky (but not moist) rag used just for this sort of thing. It should be easy to find.
greywolf22:
Yup I used a few tackcloths and it worked like a charm. I was able to find it with the painting supplies at my local ACE hardware. Very sticky and works great
rdagger:
Compressed air works well. If you are using a sprayer, you can disconnect the hose from the gun and blast the surface with air.
Navigation
[0] Message Index
Go to full version