Main > Main Forum
Coin mechanisms bad? KeyWiz, etc.
SirPeale:
No, no, no.
The coin mech is the rectangular-looking thing right smack in the middle. There should be two little screw-things facing you (they have a slot to remove them with a screwdriver). Take them out, and you should be able to tip the mech out.
Dougmeister:
Ah. Now I see.
(Must wait 'til I leave work... ouch...)
Dougmeister:
Ok. Loosened the 2 screws & pulled the mech out.
Stilll not sure what the "Coin lockout coils" are. I have enclosed shots of the left and the right-hand sides, and labelled what I *think* is the lockout coil. Please confirm, or tell me how off I am. Thanks.
Dougmeister:
Right-hand side of coin mechanism:
SirPeale:
If you remove that spring then your coin reject won't work.
Now that you've removed your mechs, look back to the door itself.
You see where the coin microswitch is? Look up about three more inches, on the left of where the coin mech used to be. You'll see something that looks kind of like a transformer. I noted a red wire plugged into it earlier.
Remove that.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version