Main > Main Forum
T-Stick Plus Dust-Washer and Mounting.
Witchboard:
Okay, I forgot that the ball tops weren't standard. :-[ Yes, the balltops is what I was talking about. Unfortunately the ball tops seem to be melted onto the shaft instead of threaded like the J-Stick. I guess my original question still stands... but I doubt that anyone has mounted the dust washers under the plexi with the ball tops.
DennisInMN:
Hmm, interesting. I only have the stock bat style, as you can tell from my previous post. I wonder why the ball tops are made this way?
Lance:
--- Quote from: Witchboard on July 20, 2004, 01:18:13 pm ---Okay, I forgot that the ball tops weren't standard. :-[ Yes, the balltops is what I was talking about. Unfortunately the ball tops seem to be melted onto the shaft instead of threaded like the J-Stick. I guess my original question still stands... but I doubt that anyone has mounted the dust washers under the plexi with the ball tops.
--- End quote ---
I'm fairly certain that they are threaded, ultimarc just uses a liberal amount of thread locker on the ball tops.
Grasshopper:
My understanding is that the ball tops screw on but Andy fixes them in place with sealing compound so that the lift and turn 4/8 switching mechanism can work. You could probably get the ball top off if you were determined enough.
Personally if I was buying a T-Stik+ I would ask for the ball not to be glued in place.
patrickl:
You need the top to be fastened pretty well otherwise it will come undone too easily when switching from 4-way to 8-way.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version