Main > Main Forum

AMAZING - a machine shop online

<< < (3/6) > >>

GameDork:

--- Quote from: crashwg on July 18, 2004, 07:23:47 pm ---Holy cow, this place is a joke!  I DLed the program and put in the dimensions of a 2" corner bracket with no holes in it (commonly used in DDR hardpads) and just 1 came out to be $90!  For 16 it was like $170.

--- End quote ---

Do you need these or were you just checking it out? If you do need some brackets, I could make them for alot less than that!!

Ckeck this thing out I made:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=3689170475&ssPageName=STRK

crashwg:
How much is "alot less"?

Basically what I need is a standard 2" corner bracket, pretty much the exact same thing as the ones made by Stanley but with either no holes or just two holes but not in the same place.

Pretty much all it consists of is a 2x2x4 triangle with two 2x(3/4 - thickness of material).  I need it to be stainless steel.  The thickness of the metal of the stanley ones is perfect.  Oh, and the price for 16 & 32 would be awesome.

GameDork:

--- Quote from: crashwg on July 18, 2004, 09:51:36 pm ---How much is "alot less"?

Basically what I need is a standard 2" corner bracket, pretty much the exact same thing as the ones made by Stanley but with either no holes or just two holes but not in the same place.

Pretty much all it consists of is a 2x2x4 triangle with two 2x(3/4 - thickness of material).  I need it to be stainless steel.  The thickness of the metal of the stanley ones is perfect.  Oh, and the price for 16 & 32 would be awesome.

--- End quote ---

Eh, i can't do the stainless steel. It's pretty hard to come by where i work, sorry.

crashwg:
Nooooooooo!  Please oh please, I need these things.  Is there no way you could just buy a sheet?  Would that cost too much?

On the other hand, with no basic knowledge of galvinization nor knowing where you work and the capabilities/resources you have...  Having galvinized zinc or something similar in looks would work too.  I just need it to look close to the panels on my pad and not rust.

GameDork:

--- Quote from: crashwg on July 19, 2004, 12:10:17 am ---Nooooooooo!  Please oh please, I need these things.  Is there no way you could just buy a sheet?  Would that cost too much?

On the other hand, with no basic knowledge of galvinization nor knowing where you work and the capabilities/resources you have...  Having galvinized zinc or something similar in looks would work too.  I just need it to look close to the panels on my pad and not rust.

--- End quote ---

Stainless is pretty expensive.

Yeah, I could check on buying some from a steel supplier.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version