Main > Main Forum
Speaker cord too short
DennisInMN:
--- Quote from: pcolson on July 03, 2004, 04:44:55 pm ---Just slice in extra speaker wire to the satelites. From the pictures I have been able to find online, it looks like they are just plain speakers, volume controls are seperate. If you cut the wire to the satelites, it should just be a pos and a neg wire in there. Just add however much length you need.
Paul
--- End quote ---
I'll probably try this if no one knows of an extension cord. It seems like it should work just fine.
DennisInMN:
--- Quote from: pcolson on July 03, 2004, 04:44:55 pm ---Just slice in extra speaker wire to the satelites. From the pictures I have been able to find online, it looks like they are just plain speakers, volume controls are seperate. If you cut the wire to the satelites, it should just be a pos and a neg wire in there. Just add however much length you need.
Paul
--- End quote ---
This is what I ended up doing. Worked great! Thanks.
MiKman:
I cut mine so that I could remove the main board with volume control, power button etc. out of the front right speaker. Then I had twist and solder each wire back together again. I'm sure you could do the same except extend the cable instead... That thick cable has about 11 small wires in it you could just use some 20 gage (or so) wire to extend it.
Navigation
[0] Message Index
[*] Previous page
Go to full version