Main > Main Forum
having to hold button down to get others to work minipac
(1/1)
Mock:
I can't get my buttons and joysticks to respond, unless i hold player 2's 2nd button down. once i do that the other buttons respond, but I can't figure out why it does this. My wires are setup right and i'm using the minipac with harness
Santoro:
It almost sounds like your ground (or common) wire is wired to button 2 by mistake?
Ed ONeill:
santoro might be on the right path......If you are using the minipac with the wiring harness check to see if your using the right grey wire(ground)
Signed
Ed
CthulhuLuke:
this problem was solved last night btw, Mock forgot to clean up his post, but it was a grounding problem, it would only chain the ground when one button was pressed because he had switched the GND wire with another normal button wire.
Navigation
[0] Message Index
Go to full version