Main > Main Forum
Coin Door Problem
Thenasty:
try notepad to see if you get the character you assigned. If you do, maybe your swicthes are bad.
mikeyv23:
That's the problem, I cannot assign anthing to them. The switches and buttons were working when I had them hooked up as coin1 and coin2 without the coin door.
And then this part makes no sense to me. The new WinIpac detects my USB as PS/2. I doubled checked all the connections and I just don't get it.
Thenasty:
--- Quote from: mikeyv23 on June 07, 2004, 10:12:04 pm ---That's the problem, I cannot assign anthing to them. The switches and buttons were working when I had them hooked up as coin1 and coin2 without the coin door.
--- End quote ---
Before you had this wired up to COIN1 and COIN2 not 1sw7 and 2sw7. Thats why it work. Those are assigned to 5 and 6.
--- Quote from: mikeyv23 on June 07, 2004, 10:12:04 pm ---And then this part makes no sense to me. The new WinIpac detects my USB as PS/2. I doubled checked all the connections and I just don't get it.
--- End quote ---
I am kinda lost of exactly what you wanted to do. What do you want the 1sw7 and 2sw7 buttons for ? Some games really don't need 7 buttons maybe you are trying to run a game and using those buttons and of course it won't respond cause the game don't use it.
mikeyv23:
I wanted to map them to keys like return or esc. Several other people have done this and I am just trying to figure out how.
Thenasty:
then you need to re-configure them using the utility. Read the docs of the uitlity that will tell you how to re-assign a key to any of them. If you can't figure that out, then re-configure MAME ESC to whatever character is set for 1sw7 or 2sw7 and so forth.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version