Main > Main Forum

YAY ! p360 on sale again 0_0

<< < (8/11) > >>

sirwoogie:
Use the super as your basis for comparison:

http://www.happcontrols.com/joysticks/super_joy_e.htm

as the l x w x h dimensions of the stick are almost identical. I'd say the mounting plate is about 1/8" thinner vertically, but that is pretty inconsequential. I own both and just did a side-by-side comparison and the eclip and stick connectors line up on the bottom of the sticks if they're mounting plats are aligned. Attached is a rough side by side of a super topfire (same dimensions, just has a microswitch on the bottom) next to a p360. I'll attach a scan of the Instructure card Happ included with the P360 on the next post

Hope they help

sirwoogie:
Next scan as promised.

sofakng:
Can anybody tell me what router bits (and/or drill bits) I would need to mount the p360 from under the control panel?  I'm assuming thats how I want to mount them because I want them to be as hidden as possible (the mounting section).

Also, what router/drill bits would I need to mount a T-Stick Plus?

Drkshadow:
Appreciate all the info folks, thanks. :) Hopefully these things will be getting put together soon and my control panel will be all nice and dandy, but then again I have one more issue apparently, which is the 5v of power. Apparently DaveMMR asked this earlier but never got a response :( I'm looking to just get a 5v power supply for the sticks, is there enough power to daisy chain them or what, or rather even, How many amps the sticks require? This info would be greatly appreciated, thanks. :)

NoOne=NBA=:
You can daisy chain them, but I would do it off the computer's power supply just to be safe.

There are other places you COULD pull the 5v from; but, not knowing the current draw and specs on those spots, you'd be safest just to get it directly from the computer.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version