Main > Main Forum
Which CPU would you get?
Jawadali:
--- Quote from: pointdablame on June 24, 2005, 01:19:33 am ---
--- Quote from: D10 on June 24, 2005, 01:05:48 am ---
--- Quote from: pointdablame on June 24, 2005, 12:30:13 am ---
--- Quote from: thetered on June 24, 2005, 12:26:39 am ---Let me ask a semi off topic question then, I just bought a AMD Sempron 2500 but my motherboard and windows identifies it as a 1000mhz AMD Athlon.
Is it supposed to say that?
--- End quote ---
Sempron 2500+'s are supposed to be run at 1.75Ghz.
Your FSB and/or your Multipliers are set incorrectly in your BIOS.
--- End quote ---
Or it could be a jumper setting on the board it self.
--- End quote ---
quite right... check your motherboard manual to make sure it's on the correct setting if there is in fact a jumper.
--- End quote ---
That will probably be the case if you have an older motehrboard (more than 3-4 years old).
If you have a recent motherboard (like 1-2 years old), go into the BIOS when the PC boots (you usually have to keep hitting "Delete" or "F2" or "F12"; it's defferent for each motehrboard), and there should be an option to "Load Optimized Defaults".
That Should set you to the right speed. The same thing happened when I installed my Athlon XP 2500+ for the first time; it's like a safety feature.
krick:
If you buy an Intel CPU, go for a P4 with a "Northwood" core.
Jawadali:
--- Quote from: krick on July 01, 2005, 01:49:18 am ---If you buy an Intel CPU, go for a P4 with a "Northwood" core.
--- End quote ---
krick:
--- Quote from: Jawadali on July 01, 2005, 02:01:12 am ---
--- Quote from: krick on July 01, 2005, 01:49:18 am ---If you buy an AMD cpu, go for a "Venice" or "San Diego" core.
--- End quote ---
--- End quote ---
USSEnterprise:
What about a G5? those are kinda fast, right? ;D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version