Main > Main Forum
A Dremel Bit Question
exian:
Hi Guys got a question for you...
Does anyone know if there is a dremel bit available for routing the channel to hold the t-moulding?
rsoandrew:
If you have the 1/4 collet attachment for your dremel any 1/4 shaft router bits will work. Just make sure that you get bits that have a ball bearing guide. That being said, I wouldn
flampoo:
There are a few 1/16th bits that will work for the dremel. As most bits are carbide, they're not strong enough to use on anything except particleboard. I've done the routing on my most recent cab made of MDF with my dremel and a jig I fashioned at home. I had to make my own because there are no attachments that you can purchase for that kind of routing.
fredster:
Try a grinding disc. It's slow going, but it's going. You wll be surprised at how it cuts. Try it on a scrap piece.
I bought the $33 t slot cutter from tmolding.com and I use it whenever I work on a cab. You can screw up a t-slot pretty fast with it too if you let it dip.
SNAAAKE:
Please PLEASE invest on a router.You will thank me later ;)
Navigation
[0] Message Index
[#] Next page
Go to full version