Main > Main Forum

Arkanoid spinner question

(1/2) > >>

nomad:
Its probably been asked before, but here is my question anyway:  Is it possible to connect an Arkanoid spinner to an Optipac/Minipac?  If so, does it require any modification to the spinner?  Thanks.

AlexC:
Another question, how do you get the top off the spinner to remove spinner from old CP  ???
Sorry didn't want to start another post to ask that question  :)

Thenasty:

--- Quote from: AlexC on May 03, 2004, 03:30:54 pm ---Another question, how do you get the top off the spinner to remove spinner from old CP  ???
Sorry didn't want to start another post to ask that question  :)

--- End quote ---

Thru the hole on the side of the Spinner TOP. YOu need an Allen wrench to lossen it up.

Take a look at the pics here of the arkanoid spinner top.

http://www.arcadecontrols.org/yabbse/index.php?board=10;action=display;threadid=17522

Thenasty:

--- Quote from: nomad on May 03, 2004, 03:25:53 pm ---Its probably been asked before, but here is my question anyway:  Is it possible to connect an Arkanoid spinner to an Optipac/Minipac?  If so, does it require any modification to the spinner?  Thanks.

--- End quote ---

Maybe changing the board w/a PS2/Serial/USB mouse should do it. It requires a little hacking/work tho.

AlexC:
The spinner top that I have is different. It has two pinsize holes on each side. I goes straight thru.

Navigation

[0] Message Index

[#] Next page

Go to full version