Main > Main Forum

Control Panel for 1981 Qix Machine.

<< < (3/3)

mllkat:
 :) You guys ROCK!! I appreciate all the input. Let's just see now if I can get the job done. Thanks again for your suggestions.

Mllkat

dogg0:

--- Quote from: Apollo on April 25, 2004, 08:06:38 pm ---I would suggest you don't mutilate that CP but that you get a sheet metal business to make you a blank copy of the panel, have it drilled ( you could do that yourself ) and the powder coat it. Then just SF layout should fit fine.

--- End quote ---

do you know of any online sheet metal places? or what to look for in the yellow pages? or what to ask when you find them? I have a 1981 Scramble machine that I need to put a new cp in. thanks.

Stingray:

--- Quote from: dogg0 on April 27, 2004, 03:46:29 pm ---
what to look for in the yellow pages? or what to ask when you find them?

--- End quote ---

Look under Metal fabricators. Take your old panel in and have them replicate it. They can also punch holes where ever you like.

-S

Lance:
I would just build one out of wood.  My friend has a taito cab that we are working on and it you will save yourself a lot of effort if you just make a wood (mdf) panel.  The clips that hold the panel down are bolted on to the metal panel so it would be easy enough to just do the same on a wood panel.

hyiu:
I think mine is an old 24 in cab... so the CP is just like 22.5 in or so....

http://geocities.com/hyiu/pics/Arcade/Cab_and_Stick/

you can check out the link, and click on the pics...

it was a metal panel, and I redo it with wood... and actually have enough space below to have a keyboard drawer... (but its tight....)

so... it should fit 2 player SF style....

good luck...

Navigation

[0] Message Index

[*] Previous page

Go to full version