Main > Main Forum

MameWah & X-Arcade

(1/2) > >>

MameMe:
Is there a readme that will show me how to setup my x-arcade controller in Mamewah?  I've searched Google with no luck.

Minwah:
The default settings should work OK with the X-Arcade...

If you mean in MAME then you need to set your ctrlr to 'xarcade' in your mame ini file.

MameMe:
I haven't changed my Mamewah settings.  The x-arcade controller DOES work with Mame32, but I don't like the front-end of mame32.  Hence I am tyingto use mamewah.

I have the normal mame (not mame32) working great with mamewah, but my x-arcade controller does not work in mamewah.

Minwah:

--- Quote from: MameMe on March 31, 2004, 11:46:02 am ---I haven't changed my Mamewah settings.  The x-arcade controller DOES work with Mame32, but I don't like the front-end of mame32.  Hence I am tyingto use mamewah.

I have the normal mame (not mame32) working great with mamewah, but my x-arcade controller does not work in mamewah.

--- End quote ---

Ahh, it could be the Num Lock is to blame...I'm not sure but if the X-Arcade is like the HotRod and uses the num. pad 'cursors' then it will be picky about whether the num. lock - it should be turned off.

Hit P2 Start to see if the menu pops up - this should confirm that MAMEWAH is receiving the input from the X-Arcade...

MameMe:
I only have a x-arcade solo so I don't have a P2 button.

But..I opened notepad.exe and I noticed that my buttons are producing output.  For example my left white button located on the side of the x-arcade spits out the number 3.  The right button spits out number 4.  My white player 1 start button spits out number 1.

The controller works fine in Mame32, but it does not work with mame commandline  & mamewah.

Please help, I really want to use Mamewah as a front end.

Navigation

[0] Message Index

[#] Next page

Go to full version