Main > Main Forum
removing lock from coin door w/o key
MinerAl:
Shotgun.
;D
GamingGreg:
If you can't get to the back of the lock, you can try the old screwdriver trick. Just insert a screwdriver and turn hard until it moves 1/4 turn. Typically these locks are not that good, so that works. Then you can remove the lock and replace it.
Ken Layton:
Is the door already installed on a machine or did you just buy it and haven't put it on?
nomad:
I am thinking about purchasing a coin door from ebay and the guy does not have the key for the one I am interested in. So I was just wondering how one would go about removing the lock. Thanks for the replies :)
Thenasty:
--- Quote from: nomad on March 22, 2004, 03:21:11 pm ---I am thinking about purchasing a coin door from ebay and the guy does not have the key for the one I am interested in. So I was just wondering how one would go about removing the lock. Thanks for the replies :)
--- End quote ---
Easy:
1. Remove the NUT
2. Remove the CAM
3. REMOVE another NUT under the CAM
4. Pull it out.
5. Replace w/a new one.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version