Main > Main Forum
What piano hinge do I need
crashwg:
I'm looking to put a black piano hinge on the back my cab and underneath the CP but am unsure of what size I will need. I've checked www.mcmaster.com (search "piano hinge") and found black piano hinges, but there are so many sizes I don't know what I need.
The back door is
Mugzilla:
This part of the project really isn't rocket science. It all depends on how/where you are going to fasten the hinge, thickness of the wood you are using, etc.
McMaster-Carr is a great source, but Lowes is closer and has better shipping rates.
menace:
I went to home depot got the 1/2" tight clearance and it worked well--just pre drill all your holes the same dia. as the shank of your screw (the screw width minus the threads) I just hold up the drill bit against the screw until you see nothing but threads on either side.
Tilzs:
It may be cheaper for you to just run down to your local hardware store and buy the piano hinge of a length longer than you need and just cut it to the length you need with a saws all or a hacksaw. They you can just paint it black with some spray paint.
nipsmg:
I used one of the long standard hinges that Home Depot had. I just cut it to size with a jigsaw & a metal cutting blade. Took like 20 seconds. I pre drilled all the holes for the screws and screwed them in. Haven't had a problem with it..
--NipsMG
Navigation
[0] Message Index
[#] Next page
Go to full version