Main > Main Forum

Opinions on Happ Subminiature Joystick?

<< < (2/2)

KrispyTheClown:
Well, I remeasured the control panel last night, and it was 4" and not the 3" I thought I remembered.  I tested the setup with a junked joystick I had, and it looks like it will handle a standard joystick just fine.

This is going into a small Pitboss bartop cabinet, and it didn't look like it would handle a full-size joystick.  Since it will, I'm going to be putting a Happ Super on it, 3 game buttons, a Ms. Pac/Galaga 4-way joystick, and P1 & P2 start buttons.

Tiger-Heli:

--- Quote from: KrispyTheClown on March 16, 2004, 09:41:28 am ---Well, I remeasured the control panel last night, and it was 4" and not the 3" I thought I remembered.  I tested the setup with a junked joystick I had, and it looks like it will handle a standard joystick just fine.

This is going into a small Pitboss bartop cabinet, and it didn't look like it would handle a full-size joystick.  Since it will, I'm going to be putting a Happ Super on it, 3 game buttons, a Ms. Pac/Galaga 4-way joystick, and P1 & P2 start buttons.

--- End quote ---
If it will handle a standard joystick, I would recomend a switchable one like the Prodigy from www.groovygamegear.com (if you have room for a 5-inch mounting plate), or the T-Stick Plus from www.ultimarc.com (if you don't).

To me, it just looks cleaner to have a single stick on the panel and these are swithchable from above the panel.

gnateye:
i have to agree with heli, dont stick 2 jsticks on such a small panel go with a nice small switchable like the ultimarc ones, you wont regret it

Navigation

[0] Message Index

[*] Previous page

Go to full version