| Main > Monitor/Video Forum |
| FIXED - CRT Top of the screen folding over? |
| << < (2/5) > >> |
| LTC:
Thank you both for the great information. I don't have a 100uf 35v cap in my stash. If only Radio Shack was still around. I'll have to wait for Amazon order to get here. Hopefully I can get this done without getting electrocuted. |
| Zebidee:
You can safely use a 100uF with a higher voltage rating (=>35v). |
| LTC:
--- Quote from: Zebidee on June 18, 2025, 07:22:24 pm ---You can safely use a 100uF with a higher voltage rating (=>35v). --- End quote --- I should have stated that all of the 100uf caps I have are bellow 35v (16v and 25v) :) |
| LTC:
So my google search for the schematics may have been way off. Here are some pictures of the actual chassis. |
| princess prin prin:
The vertical IC is the 7-pin IC401 (screwed to the heat sink near the rear of the tuner), probably an LA78040 or TDA8170 (same package, same pinout). The cap in question is across pin 3 (-) and pin 6 (+). I can't follow the traces in your pic so I can't tell which one it is but you should be able to identify it with this info (capacitance will most likely be 100uF). |
| Navigation |
| Message Index |
| Next page |
| Previous page |