Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Makvision M2929D4-TS SVGA will not accept signal from AMD, works with Nvidia  (Read 715 times)

0 Members and 1 Guest are viewing this topic.

Noob_Rectifier

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:September 19, 2024, 12:55:28 am
  • I want to build my own arcade controls!
I'm trying to get emudriver working with this monitor and I can't get it working for the life of me.
The cab that I bought was functional, but was in need for an upgrade. I've tried an hd 6950, two r7's and an r9 380. I'm fairly certain I've set them up correctly, going as far as running TeamViewer and only having the VGA plugged in. I never get a picture when going through OSD.
 
However, this monitor instantly sees a Nvidia 9400gt as well as my old Thinkpad t420.
 
I'm totally lost. I know these makvision monitors can be finicky but to have nothing from AMD and functional with Nvidia is odd.
 
I have also used CRU to set the display to 800x600 at 56khz. If I remember correctly, I at least got a black screen instead of the dreaded "disconnected" message.
 
What can/should I be doing differently? Any help is definitely appreciated