Arcade Collecting > Merit/JVL Touchscreen

megatouch joystick cable pinout

(1/2) > >>

allenc:
anyone have the joystick cable ?  the black rectangle plug to the jst ?
or anyone have the pinout on both ends so I can make one

mahkeymike:
model would probably help, there was a few that have joysticks.

allenc:
it's the stand up fusion ion ,  from what I see on eBay it looks like the same style chord that is used on the counter top ion
the circuit board has the buttons on it, but they are not used it uses the arcade buttons and the chord i have jumpers to the arcade buttons ,
my board has the chord from the joystick with a black plug on the end , I need the extension from the black plug to the white jst to the I/O board

mahkeymike:

--- Quote from: allenc on July 16, 2024, 07:15:51 pm ---it's the stand up fusion ion ,  from what I see on eBay it looks like the same style chord that is used on the counter top ion
the circuit board has the buttons on it, but they are not used it uses the arcade buttons and the chord i have jumpers to the arcade buttons ,
my board has the chord from the joystick with a black plug on the end , I need the extension from the black plug to the white jst to the I/O board

--- End quote ---

i might have the schematic for the ioboard that shows the pinouts for the joystick connector. I will have to dig it up.

allenc:
I have that , I found it online the I/O board jst pinouts...  I don't know what it is on the joystick side is..  I'm missing that joystick extension wire
   I have a tabletop aurora , but I don't want to take it apart to trace out the joy stick wires right now , I will if I can't find that wire ...  I would like to find the chord
I got this stand up ion for free, it was all in pieces , I got it all working and got the software installed I have the 2009 dvd's,  I have it almost all put back together , I still have to install the touchscreen with doubleside tape to the lcd ,   I'm going to give this one to may dad

Navigation

[0] Message Index

[#] Next page