Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Arcade 1up Atari 50th mod  (Read 11469 times)

0 Members and 1 Guest are viewing this topic.

Roboman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 35
  • Last login:February 08, 2024, 10:13:59 pm
  • I want to build my own arcade controls!
Arcade 1up Atari 50th mod
« on: October 29, 2023, 03:10:36 am »
Has anyone added a Dell 20" 2007FP to the new Atari 50th cab?
I noticed they are slightly less wide than say the SF or MK cab, so wondering if it was still possible to squeeze the 2007FP in there?

Roboman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 35
  • Last login:February 08, 2024, 10:13:59 pm
  • I want to build my own arcade controls!
Re: Arcade 1up Atari 50th mod
« Reply #1 on: November 18, 2023, 01:56:59 am »
I'll answer my own question and confirm it would fit...with just a few mms to spare on the width, so don't know how a bezel would look.
I was skeptical about Arcade1up, but really impressed with this wee cab, especially the trackball which is very smooth and good quality.
My only gripe - if you're tall you have to use a stool as the marquee juts out and blocks your view of the very top of the monitor.
I plan to mod it into a MAME cab with an additional flight stick.
That way I will have covered most of the MAME games which use spinner, trackball or/and top-down fire joystick (even twin stickers like BattleZone).

SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3546
  • Last login:June 27, 2024, 04:02:55 pm
  • my joystick is bigger than your joystick !
Re: Arcade 1up Atari 50th mod
« Reply #2 on: November 20, 2023, 01:07:31 pm »
^ me too lol..they all look pretty bad and wonky BUT I like the yoga flame edition withour riser for $300 it actually looks like the big midway cabinets. and I sold the parts for like $200(monitor, game, panel) and replaced all that now I have a nice functional cabinet thats playable.

Roboman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 35
  • Last login:February 08, 2024, 10:13:59 pm
  • I want to build my own arcade controls!
Re: Arcade 1up Atari 50th mod
« Reply #3 on: January 16, 2024, 07:58:40 pm »
I finished my mod to my Atari 50th cab.
Basically put a PC with HyperSpin in there and added an Ultimarc MiniGrip stick.
This way I can play pretty much play any game with trackball, spinner, two joysticks with fire, including those like Mad Planets, Tron and Discos of Tron which need a joystick with a fire button and a spinner.

Unfortunately the trackball and spinner on Atari 50 don't work with the Thunderstick 12 in 1 board, so I had to swap these out for a TurboTwist and a Thunderstick trackball. It was a shame as the stock trackball on the Atari 50 was really good.

I initially planned to upgrade the monitor, but once you apply the MAME HLSL to the games, the stock monitor really pops and I think its about the right size for this cab.
Overall it was a bit of a fiddle, but I'm happy with the end result.