Main > Driving & Racing Cabinets

Help to get the SuperModel LAN set-up working (PCs already connected)

(1/3) > >>

bsoder52:
Hi all -

Working to get the SuperModel LAN Linked with 2 PCs.

I have TechnoParrot and M2 working so far on the LAN.

There game assignments settings changes are set correct I think.

Attached are pics for the attempt. Much appreciation for any help.

Thanks

buttersoft:
Settings look right, at first glance. I should be able to pull the settings off my cabs tomorrow if you need it, but first...

Why is your version of supermodel.exe dated from 2019? And what is that net build called 716 from 2018? The simulated netboard gm_Matthew implemented only came about in.. 2021? 2022? Make sure you have the latest build of Supermodel directly from the Supermodel forums. And when you do, start from scratch as some of the ini options have changed. Feel free to port your control bindings over tho. I wouldn't use the frontend either, if you're having issues. Keep things as bare as possible.

Next, are you positive those IP's are right? when you open the CMD console from windows and type IPconfig, those are the IP's reported? Can you then ping each from the other? And other games work fine? I don't know if Supermodel needs a specific IP range to work, but i would have thought not.

Fursphere:
The IP addresses caught my attention too.   M2 requires the IPs to be sequential right?

bsoder52:
Buttersoft,

I'm working off of a pre-configured build. (Big box front end, emulators, games, all game together). I've basically took out the games I didn't want and am now working to connect the games I can on my LAN. Then will install both PCs into the Driving cabs. I refurbished 2 Daytona2 sitdowns. It's been a long project from a time standpoint. I believe I can pull the Supermodel emulator and install a new version without screwing it all up.  fingers crossed!

nugarp:

--- Quote from: Fursphere on August 28, 2023, 10:59:59 am ---The IP addresses caught my attention too.   M2 requires the IPs to be sequential right?

--- End quote ---

Nope. m2 uses a ring system, and it can hop between IPs in any order.

Navigation

[0] Message Index

[#] Next page

Go to full version