Main > Main Forum
4 player control panel theory
Witchboard:
--- Quote from: krick on March 04, 2004, 11:24:24 am ---
--- Quote from: Witchboard on March 04, 2004, 08:41:21 am ---Those look familiar. ;D
--- End quote ---
Are they yours? I can't remember where I found the original image that I'm hacking up.
--- End quote ---
Everybody uses that Visio template, it's very helpful. The 4 button layout on 3 & 4 give it away. It's not like it MY layout, I'm sure somebody has done it way before I ever showed up.
--- Quote ---
--- Quote from: Witchboard on March 04, 2004, 08:41:21 am ---If you are dead set on having the stick spacing the same for smash T.V. and want them in a straight line, then you don't have much of a choice. You may want to consider having a 3142 layout though. That way, your first player will be more centered for single player games and the rest meets your demands.
--- End quote ---
That's what I'm thinking.
--- Quote from: Witchboard on March 04, 2004, 08:41:21 am ---I really don't see any room for a couple of trackballs on top of 4 joys within the confines of your width. Unless you plan on making your CP deep enough to accommmodate your trackballs you may want to look at swappable CP or something.
--- End quote ---
My control panel is about 15 inches deep. I'm thinking that maybe I can set the joystick line back a little and put 2 trackballs in front. If I used the 3142 layout instead, I could put the trackballs below the "7 button" areas and they would be relatively centered on the screen.
Here's a pic of my control panel as it is currently...
--- End quote ---
When I designed my similar layout I was working with a 45" CP. I'm just afraid that it will be pretty cramped in there.
Here is the thread I started some time ago when I first decided to go with a 4 player CP. Maybe you can find some info to help your decision.
unclet:
Check out my 4-player Standup Cabinet. Four players are comfortable with my configuration. I believe in the photos there is a picture which shows the dimensions.
http://unclet.arcadecontrols.com/index.html
PS: My theory about 4-player vs 2-player cabs, is that if I was going to go through the trouble of making one of these cabinets from scratch, then it was going to have 4-players just in case one person really liked Gauntlet. Basically, if your going to do it, make sure you "really" do it! I also love 2-player Karate Champ.
LJHalfbreed:
Someone else posted something on a different forum.... and pointed me here...
Longer story shorter... Unless you plan on doing a frankenpanel that can play *every* game out there, I still don't see a problem with using a "canted" or angled panel. The ergonomics are just better for everyone involved, because otherwise there's a bit too much elbow rubbing and such if you go straight across. The only way to fix this is to widen the cp, and then I think it's getting a bit too much, because *then* you screw up the whole player viewing angle-to-monitor size ratio.
Yes, on a canted panel you can't play 2 player smash tv (and the few other 2-stick games) but if you're building a panel for 4 players, and you *have* the need for 4 players, then it's best to do what's best for players 3 and 4. Unless you're building a "does everything panel" with a ton of controls/buttons/trackballs/spinners/pedals/wheels, then feel free to do it however. ;D
(FYI: on my 'does nearly every game' panel, I have ports for PSX controllers on players 3&4.... no sense in creating more "Controller chaos")
Just my 2 cents.
Navigation
[0] Message Index
[*] Previous page
Go to full version