Main > Main Forum

Sega Model 1 to Jamma Adapter???

(1/1)

SkateDetroit:
Hey guys,

    I've got a Virtua Fighter that's giving me some grief (Audio Problems). I've looked at the monitor and it is dual res (25 and 15). I'd like to attach a JAMMA harness to the Model 1 harness and stick a shiny new fighting game in there to save the game.

    Does anyone know where I can find a Sega Model 1 to JAMMA adapter? Or does anyone have the pinouts for the Model 1 harnesses, so that I could make my own?

     Thanks!!!

              ~A

paigeoliver:
I wasn't able to find that pinout with a quick search, but you can always simply buy a JAMMA harness and wire that in too.

At one time I had a cocktail that had JAMMA, Konami, City Connection, and Universal harnesses all installed at the same time.

Obviously you only plug in one board at a time.

Ken Layton:
For the pinout try www.arcadehelp.com

For the adapter try www.multigame.com

SkateDetroit:
Paige and Ken,

    Thanks for the replys! Couldn't find any Model 1  info on either of those two sites.

    I figured If I can't find anything I will just get a JAMMA harness and connect it to the Model one harness. Only hang up there is I need the pinouts for the Model 1. :( But I got a feeling someone out there has the info. I've searched the net best I can but I can't come up with the info either.


                Thanks again

              ~A

Navigation

[0] Message Index

Go to full version