Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Flycast Naomi2 - with Initial D 3 setup & LAN guide  (Read 19352 times)

0 Members and 1 Guest are viewing this topic.

fablog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 346
  • Last login:February 04, 2025, 11:19:38 pm
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #40 on: January 19, 2025, 06:25:18 pm »
@buttersoft , do you know how to output lamps signal? I tried "broadcast digital output" but it freezes all my naomi games. Thanks

Envoyé de mon Pixel 6a en utilisant Tapatalk


buttersoft

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1794
  • Last login:Yesterday at 04:05:36 pm
  • Is running at 15kHz
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #41 on: January 21, 2025, 05:24:52 pm »
@buttersoft , do you know how to output lamps signal? I tried "broadcast digital output" but it freezes all my naomi games. Thanks

No, i do not :/ I haven't actually looked at updating my flycast install for ID3 for a while, but was planning to soon. Hmm, you have output lamps going for MAME or Teknoparrot or something else, via MAMEhooker, presumably? It might be worth checking with Boom or MightyMike about whether the outputblaster supports flycast. I'd jump into the discord right now but i'm away on holidays with the family this week :D

I plan to go through this soon, so watch this space? I'm sure i know you from a discord too, fablog, but which one? IDPlayers?

fablog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 346
  • Last login:February 04, 2025, 11:19:38 pm
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #42 on: January 21, 2025, 05:45:50 pm »
@buttersoft , do you know how to output lamps signal? I tried "broadcast digital output" but it freezes all my naomi games. Thanks

No, i do not :/ I haven't actually looked at updating my flycast install for ID3 for a while, but was planning to soon. Hmm, you have output lamps going for MAME or Teknoparrot or something else, via MAMEhooker, presumably? It might be worth checking with Boom or MightyMike about whether the outputblaster supports flycast. I'd jump into the discord right now but i'm away on holidays with the family this week :D

I plan to go through this soon, so watch this space? I'm sure i know you from a discord too, fablog, but which one? IDPlayers?
The only discord channel we have in common is the TP one. Output blast works with every other emulator.
« Last Edit: January 21, 2025, 05:47:25 pm by fablog »

buttersoft

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1794
  • Last login:Yesterday at 04:05:36 pm
  • Is running at 15kHz
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #43 on: January 22, 2025, 01:32:23 am »
IDK then. Are you sure it's coded to work with Flycast? And i made the mistake recently of not testing both the 32-bit and 64-bit versions, and panicked when i couldn't see the outputs for something...

fablog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 346
  • Last login:February 04, 2025, 11:19:38 pm
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #44 on: January 22, 2025, 05:59:10 pm »
IDK then. Are you sure it's coded to work with Flycast? And i made the mistake recently of not testing both the 32-bit and 64-bit versions, and panicked when i couldn't see the outputs for something...
Not sure and I can't find any information about a flycast support anywhere. So, it could be incompatible.

Envoyé de mon Pixel 6a en utilisant Tapatalk


Bunta

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 02, 2025, 06:29:36 pm
  • I want to build my own arcade controls!
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #45 on: February 02, 2025, 03:49:08 pm »
Alright hoping I can get some help here.  So as of right now I'm running Flycast Ver 2.4.  I'm trying to setup the "Network" portion of Initial D Arcade Ver 2 Export.  When I click on the Network tab on Flycast I noticed that the "Network Type" is selected as "Disabled".  I'm assuming I need to select the "Naomi" option to allow me more options to setup the host, etc etc.  Anyone know how to do it? As of right now under the "Network Options" I only have "Enable UPnP", "Broadcast Digital Outputs" and "Broadband Adapter Emulation".

Bunta

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 02, 2025, 06:29:36 pm
  • I want to build my own arcade controls!
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #46 on: February 02, 2025, 04:12:56 pm »
I think I may have figured out my problem.  I couldn't create a "card" to save the car data so I turned off the "Free Play" in the Flycast settings.  But because I did that the "Network Type" was also disabled.  So all I had to do was click on "Free Play" in the "General" tab, clicked on the "Network" tab and the "Network Type" options were no longer disabled.

Bunta

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 02, 2025, 06:29:36 pm
  • I want to build my own arcade controls!
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #47 on: February 02, 2025, 06:01:32 pm »
Ok new question. Has anyone been able to load 2 saved cars to play against each other?

buttersoft

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1794
  • Last login:Yesterday at 04:05:36 pm
  • Is running at 15kHz
Re: Flycast Naomi2 - with Initial D 3 setup & LAN guide
« Reply #48 on: February 02, 2025, 11:45:59 pm »
Ok new question. Has anyone been able to load 2 saved cars to play against each other?

I have with old versions, IIRC. Just setting up a new release, so i'll try to test this in the next few days and get back to you.