Main > Raspberry Pi & Dev Board

Retropie Daphne Joystick Woes

<< < (2/2)

Gilrock:
By moving down I mean if you view the board with the USB connector on the left you plug into the bottom row instead of the top row.  You can see in this photo how I've plugged the joystick inputs into the bottom row.  At first I had them on the top row where its labeled Up, Down, Right, Left and it seemed to work for some games but was a big problem for Daphne.  I figured the other games where probably missing some inputs but didn't show the problem as much as a game like Dragon's Lair where any bad input causes a fail.

Vocalitus:
I have the joystick wired into the controller port so I will try it your way and I hope for some success.

Thank you very much for your time on this.   :applaud:

Gilrock:

--- Quote from: Vocalitus on May 03, 2021, 07:06:16 pm ---I have the joystick wired into the controller port so I will try it your way and I hope for some success.

Thank you very much for your time on this.   :applaud:

--- End quote ---

What do you mean by the "controller port"?  Is that the 5 pin connector on the top left of my photo?  If you have the type of joystick that uses that 5 pin cable then that's where it needs to plug in.

Vocalitus:
Well I bought another encoder board as I needed the two pin plugs to try the other UDLR option on the DragonRise and sadly it doesn't work. 

I have to sacrifice a KADE for the endeavor.  Apparently its a bug in the daphne emulator core that is making the joystick non detectable.

Plug in a keyboard or Xbox gamepad and it works perfectly.

Oh well. :)

Navigation

[0] Message Index

[*] Previous page