Blank screen/no signal after CRT Emudriver install

[thisispatrick]

Hey everyone, I'm trying to install CRT Emudriver but I'm running into issues. I'm using a Dell HD6670 (DVI-D+DP+VGA) and I'm trying to use my DVI-D monitor to set everything up, but as soon as I install CRT Emudriver, the screen gets blank and my monitor enters sleep mode. Rebooting the machine, I can see the BIOS and Windows splash screen, but it loses signal as soon as the driver loads, before I reach the desktop. Tried on clean Win7 and Win10 install, can't test DP since I don't have a DP monitor. Trying with a VGA + DVI-D, only VGA gets detected, as if there was only a single display. Is there a way to fix it? I was using a CRT monitor but it died out on me (hardware related) and don't have a spare VGA cable since I used the only one I had to make a VGA to SCART cable

[abispac]

enter safe mode on your pc and uninstall emudrivers.

[Calamity]

Make sure you installed this package: "CRT Emudriver & CRT Tools 2.0 beta 15 (Crimson 16.2.1 non-GCN* cards) for Windows 7/8/10 64-bits"

That cards looks a bit special, it has DP instead of HDMI, not usual. Of course, grab a new VGA cable, a normal home should have spare VGA cables in every drawer.