Main > Main Forum
My CP too big?
Iori:
Might also want to watch out about the buttons getting too close to the edge of the board too... Looks like they are really close, though that might just be the lines you drew in. I would go with a smaller cp, 4 feet is enormous... :) Would also go with the joy on the left for both players, are you doing this because of a left handed player?
PacManess:
Player 1 IS on the left, I might have said right, but i meant left.
I have the buttons on the left for a symetrical look, plus for some reason that just makes more sense for me.
We've already drilled the holes, my main concern now is how much I can shave off the sides and top.
I'm going to go play around with it a bit, let you know what happens!
Pete Harcoff:
4 feet's definitely big. My own 2-player CP is pretty big at 39" wide for the top (36" for the base), but then again, I too wanted lots of elbow room. But at that width I'd have no problem adding an additional 4-way controller in the center with room to spare.
Here's a pic:
There's about 12" between the left buttons and the right joystick.
PacManess:
Pete, that is a nice looking CP. How tall are the "legs" or base of your CP?
We're done drilling, just need to add legs, also, we need to attach things. I'll throw up a pic so you can see how screwed up it isn't.
BTW, I decided to leave it 48" long for PLENTY of elbow room (we gots some big boys). I might cut it to about 18" deep. Dunno yet.
Thanks for all your answers and help so far.
PacManess:
Ok, here is a pic of it all cut out. I'm going to put some legs on it to keep it off the ground before it's put into a cab...
Anyway, here is our work. You can see my friend Mike's fingers and 'fro. Nice.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version