Main > Main Forum

Marquee light - powered by?

<< < (2/2)

Ken Layton:
That's a common Midway light fixture same as used on Galaga, Ms. Pacman, Tron, etc.

Wire it as follows:

Black: 120 volts ac (hot)

Blue: 120 volts ac (neutral)

Green: frame ground

The mating connector is an AMP brand Universal Mate-N-Lock 3 pin which you can get from Mouser.com as their part number 571-3507661. The pins for it are Mouser # 571-3505501.

Stingray:
Thanks Ken! That's what I needed to know.  ;D

I have the mating connector, but thanks for the information.

-S

Ken Layton:
I just repaired one of these exact light fixtures last night on a Ms. Pacman. It had an open ballast.

This fixture uses F15T8CW fluorescent tube and an FS-2 starter.

If testing the ballast, a good one will read around 25 ohms of resistance.

Stingray:
Hopefully it works, but this is good to know if it doesn't.

-S

Navigation

[0] Message Index

[*] Previous page

Go to full version