Main > Main Forum

MAME, DC, PS2, all-in-one cabinet.... my planned attempt

<< < (8/8)

unicron:
I used crimpable 25 pin d-sub male / female connectors from radio shack. the inserter / extractor is also sold there for about 3 bucks.

edit: yeah it was easy to do and works fine, you can get a specific d-sub crimping tool that will make crimping easier, but I used a needlenose pliars. Soldering is better but I usually use my friends soldering iron and he is out of town. The plug works great, wires do not seem loose at all.

Negativecreep0:
Sorry for resurrecting an old old thread but i would like to know. If i have 2 psx controllers going to two p360  and i want to connect the two psx controls to one db25 adapter, can i make it happen?      Each control has up down left right (4) + 6 action (6) + start = 11 points, now can i share the ground for both p1 and p2 psx controllers. And I believe i would have to split the two +5v connections from p1 and p2 cause they go to seperate p360s.......... grand total of connections 4+6+1 (x2 controllers) = 22       +2(+5v) +1(ground) = 25 connections


am i right in assuming a shared ground and seperate +5v connections?


can i share the two psx grounds

Navigation

[0] Message Index

[*] Previous page

Go to full version