Main > Project Announcements

DeeGor's Funglo pedestal clone

<< < (4/4)

cryptokafka666:
Sorry if reviving this is against the rules:

Thank you for posting the sketchup design, I was able to generate a cut list, and have cut all the parts, and drilled all the pocket holes.

The reason for the revival is I am having a hell of a time trying to make a template for my button\joystick layout.  I am trying to do a 2p, 6-7 buttons with a 3" trackball. 

Would you mind sharing your template file?  Or, if there is another thread for resources for this that I am missing, point me in the right direction?

javeryh:

--- Quote from: cryptokafka666 on September 22, 2025, 11:41:24 am ---I am having a hell of a time trying to make a template for my button\joystick layout.  I am trying to do a 2p, 6-7 buttons with a 3" trackball. 

Would you mind sharing your template file?  Or, if there is another thread for resources for this that I am missing, point me in the right direction?

--- End quote ---

Google "slagcoin" and look at the templates there. You can pick the one that suits you best, print it out, tape it down and drill the holes. Super easy.

cryptokafka666:
yeah, I have seen those, but I want to make a template for cnc, and to be able to then use the same template when making my artwork so I can see where buttons are etc, and the slagcoin ones would need the measurements cleaned up.  I figured I'd see if a template for this was already available since my dimensions are the same.

Navigation

[0] Message Index

[*] Previous page