Main > Main Forum

Leaf Stick Comparison

<< < (6/8) > >>

Tailgunner:
As to fixing the actuator's length, a simple solution would be to add a washer or three between the actuator and the E-clip. For my quick test I simply used the Wico 4 way actuator instead. It made a definite difference in feel, but from just moving the assembled stick I could see the switches either need to be spaced out a little further or bent to adjust them. (Probably a bit of both.)

Lastly, to see how they work together I fitted all Wico parts to the repro base. Everything but the metal washer between the grommet and bottom plate would fit. The Wico grommet is a little taller, and the Wico's metal washer ended up being a bit too thick so I used the repro's metal washer instead.

Tailgunner:
Repro base, Wico balltop knob. If anything this combo would look better from the topside when there are Wico 8 ways on the same panel.

GroovyTuesdaY:
You didn't answer my question from above lol.  Where did you buy them lol.

grrrrrroooooovy :D

Tailgunner:

--- Quote from: Tailgunner on January 25, 2004, 04:11:55 am ---Mine came from Centsible Amusements.
--- End quote ---

Did so. ;)

GroovyTuesdaY:
oh man,  WHOOPS. i am sorry.    Its late and my eyes burn lol
BAD GROOVY, BAAAAD GROOVY!!  :-[  :-X
hehe.
Thanks man! :D

groovy~:D

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version