Main > Raspberry Pi & Dev Board
Does the Ultrastik 360 work with a Pi?
mahuti:
I'd definitely get in touch with Andy at Ultimarc. He might be able to provide some insight.
soonerdoc:
Well, after troubleshooting the stick for two weeks Andy finally sent me a new controller board and what do you know. Stick works! The I/O port on the first stick was bad.
Next question. Everything is working well, but I am not in love with how much throw there is on the stick. Are you using a restrictor plate? I have an extra Santa 8 way restriictor lying around. I also ordered the "stiffer" spring from ultimarc.
If you do use a restrictor do you have to hook up stick to PC and set the setting on PC to tell the stick you are using the restrictor plate? If so, do you just connect back to the Raspberry Pi and the stick knows the restrictor is attached?
ZoOl007:
No, the maps I use have their restrictor off and there is no option to switch them on. I could add that in the next incremental update.
soonerdoc:
--- Quote from: ZoOl007 on May 23, 2017, 03:22:21 am ---No, the maps I use have their restrictor off and there is no option to switch them on. I could add that in the next incremental update.
--- End quote ---
Thanks for prompt reply!
ZoOl007:
Hi,
I uploaded 0.4.0.3 beta1. It contains restrictor support for U360's.
The documentation is in the xml file. Be sure to read the change log. It contains important information concerning the process monitoring that could impact pre 0.4.0.3 beta1 users.
No big deal, just important.
kind regards.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version