Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: JAMMA pintout image has an error in it....  (Read 13009 times)

0 Members and 1 Guest are viewing this topic.

Arcadenut

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 63
  • Last login:October 10, 2023, 05:04:47 pm
    • Arcade Restoration Workshop
JAMMA pintout image has an error in it....
« on: March 11, 2016, 01:14:11 am »
http://wiki.arcadecontrols.com/wiki/JAMMA

The JAMMA pintout has Pins 20 and 21 reversed.

Pin 20 should be LEFT
Pin 21 should be RIGHT

Same for X and Y

Pin X should be LEFT
Pin Y should be RIGHT

[The link above is to the old wiki.  The new wiki page is at http://newwiki.arcadecontrols.com/index.php?title=JAMMA. -- Scott]
« Last Edit: March 11, 2016, 06:14:39 am by PL1 »
Logged

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19958
  • Last login:September 14, 2024, 08:17:47 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: JAMMA pintout image has an error in it....
« Reply #1 on: March 11, 2016, 01:19:32 am »
He's right!
Logged
***Build what you dig, bro. Build what you dig.***

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9503
  • Last login:Today at 03:34:15 am
  • Designated spam hunter
Re: JAMMA pintout image has an error in it....
« Reply #2 on: March 11, 2016, 02:09:40 am »
Quote from: Arcadenut on March 11, 2016, 01:14:11 am
The JAMMA pintout has Pins 20 and 21 reversed.

Pin 20 should be LEFT
Pin 21 should be RIGHT

Same for X and Y

Pin X should be LEFT
Pin Y should be RIGHT
Thanks for catching that.   :cheers:

Corrected version INW.

I know that the vertical spacing between pins is 0.156", but how much horizontal space do I have for the Pin#/description text?

I'd like to keep the text from hanging over the edge of the connector.


Scott
« Last Edit: March 11, 2016, 06:10:08 am by PL1 »
Logged

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9503
  • Last login:Today at 03:34:15 am
  • Designated spam hunter
Re: JAMMA pintout image has an error in it....
« Reply #3 on: March 11, 2016, 05:43:13 am »
How's this?



The .pdf should print to the correct vertical size.

The .zip file contains the .ods (Open Office Data Spreadsheet) file in case you want to change fonts, column widths, etc.


Scott

P.S. You linked to the old wiki.  New wiki page is http://newwiki.arcadecontrols.com/index.php?title=JAMMA.
« Last Edit: March 12, 2016, 05:12:10 am by PL1 »
Logged

Arcadenut

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 63
  • Last login:October 10, 2023, 05:04:47 pm
    • Arcade Restoration Workshop
Re: JAMMA pintout image has an error in it....
« Reply #4 on: March 11, 2016, 12:31:37 pm »
Looks good
Logged

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: JAMMA pintout image has an error in it....
« Reply #5 on: March 11, 2016, 12:49:40 pm »
your pin 5 and e ?
both should be -5v
not 12v on on the (pin5)

ed
Logged
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14008
  • Last login:October 07, 2024, 10:26:40 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: JAMMA pintout image has an error in it....
« Reply #6 on: March 11, 2016, 01:33:59 pm »
Quote from: ed12 on March 11, 2016, 12:49:40 pm
your pin 5 and e ?
both should be -5v
not 12v on on the (pin5)

ed

correct
Logged
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9503
  • Last login:Today at 03:34:15 am
  • Designated spam hunter
Re: JAMMA pintout image has an error in it....
« Reply #7 on: March 12, 2016, 05:16:38 am »
Quote from: Malenko on March 11, 2016, 01:33:59 pm
Quote from: ed12 on March 11, 2016, 12:49:40 pm
your pin 5 and e ?
both should be -5v
not 12v on on the (pin5)

ed

correct
Not sure how that happened.   :dizzy:

Nice catch, guys.   :cheers:

Fixed and re-upped.   ;D


Scott
Logged
Pages: [1]
  
Go Up
« previous next »