Arcade Collecting > Merit/JVL Touchscreen
Megatouch EVO Key??
mahkeymike:
Force software only works with the motherboard you have. There is no known alternate motherboard that i am aware of.
M.Lanza:
It's not unusual for Force motherboards to suffer capacitor failure, which could lead to any number of issues.
Drakin:
I'm lucky to get to that second screen maybe 1 out of 20 tries...so I'm thinking I have a motherboard issue.
ill try what you suggested ed12
Thnx
mahkeymike:
As M.Lanza mentioned, its possible bad capacitors, or bad voltage regulators, even your power supply could cause a motherboard to not pass post. Even the bios chip could be corrupt aswell.
lilshawn:
open up the machine and snap a pic of the mainboard as best you can. lots of light not a flash. we should be able to see if anything is obviously wrong right off the bat.
if it's getting past the detecting of the hard drives, it's almost home free.
maybe a BIOS configuration is corrupt. boot it up and press DEL to get into the bios settings. do a "load failsafe" and then a "load optimized" defaults. then save and exit.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version