Main > Main Forum

Happ Over Under Coin Door Question

(1/4) > >>

harveybirdman:
Okay so looking at my coin door I see that one coin reject has a flap covering it and the other does not....

This is an OCD nightmare see pic below



Question 1:  Can these be sourced?  Or should I just remove the flapper on the right side?

Question 2: Is there good source for how to disassemble a Happ over/under door?

Question 3: Are all Happ coin mechs interchangeable? More specifically will this one from Tornado Terry fit my door?

http://www.ebay.com/itm/HAPP-QUARTER-25-CENT-COIN-MECH-ARCADE-JAMMA-MAME-NEW-STREET-MORTAL-KILLER-/261224992864?pt=LH_DefaultDomain_0&hash=item3cd2391060

ed12:
yes is 1 flap is missing and not stuck in the up position,? jst remove the other.

Question 1:  Can these be sourced?  Or should I just remove the flapper on the right side? yes happ suzzo

Question 2: Is there good source for how to disassemble a Happ over/under door?
no need it is straight foward 1/8" hex nut's from the back,and 4-6 screw's on the hinge side if u are re-paiting it?,if not all work is done from the coin mech side of the door

Question 3: Are all Happ coin mechs interchangeable? More specifically will this one from Tornado Terry fit my door?  yes

ed

keilmillerjr:
Happ parts can be purchased from happ. Lol

Their website lists replacement parts. http://na.suzohapp.com/amusement_products/coin_doors/40-0038-00

ChanceKJ:
TQ has it too.

http://www.twistedquarter.com/index.php?main_page=product_info&cPath=171_175&products_id=568

If your OCD is strong enough, buy a couple so they don't look out of place when one is weathered and the other is brand new. Hell, maybe buy the little bezels too, some TLC to the metal door and you'll have that showroom look.

http://www.twistedquarter.com/index.php?main_page=product_info&cPath=171_175&products_id=567

http://www.twistedquarter.com/index.php?main_page=product_info&cPath=171_175&products_id=566

http://www.twistedquarter.com/index.php?main_page=product_info&cPath=171_175&products_id=1116

harveybirdman:
Lol Chance! We think alike! I already bought two bezels from TQ because when I took everything apart per eds duh-proof instructions I noticed the return  bezels were different frame sizes.  I only bought the one flapper though, I am going to finish the coin dor with a slightly less traditional finish and will have to paint both anyway.

 :cheers:

Thanks for the responses! This place gets me chuffed

Navigation

[0] Message Index

[#] Next page