Main > Main Forum

Ultimarc iPAC Led Connection Wiring - connector/molex?

(1/1)

MamedInCanada:
What is the connector / molex called that attaches to the header? Anyone have a picture?

Thanks

AndyWarne:

We sell pre-wired LEDs and also pre-crimped wires and connector housings for these.

But they are standard 0.1 inch pitch housings which are widely available.

These for example:  http://www.digikey.com/product-detail/en/65039-033LF/609-2339-ND/1002654

MamedInCanada:
Thank-you Andy

     Will this connection work in the below picture? I was able to find a 2 pin connector over? Red over the +5v and black over the ground on the header.

Thanks again

dkersten:
also sometimes called "DuPont connectors" or 2.54mm connectors, if you are trying to search for them on the internet.  And many of the connectors used inside computers are the same size (ie power led and switch, reset switch, usb headers, audio headers, etc)

MamedInCanada:
Thanks dkersten...found some on eBay

Navigation

[0] Message Index