Software Support > GroovyMAME
New CRT Emudriver/VMMaker/Arcade OSD download, documentation and discussion site
Calamity:
Hi,
--- Quote from: mixerjdp on November 09, 2024, 09:18:10 pm ---Hello Are there any development plans to make Emudriver compatible with more recent AMD graphics cards, such as the RX 7xxx models?
--- End quote ---
Yes, I would like to release a new version based on some recent driver, so that would support newer cards. However, it will lack support for interlace modes on newer hardware, so its usability will be limited.
Andypc:
What are the latest AMD cards supported by CRT Emu Drivers?
chinagreenelvis:
--- Quote from: Andypc on November 18, 2024, 09:47:46 am ---What are the latest AMD cards supported by CRT Emu Drivers?
--- End quote ---
The Radeon 5450 is a great card, easy to find, and inexpensive to get. The tutorials mention it specifically.
chinagreenelvis:
I have a question about EDID emulation on a 5450, actually:
Would Switchres through Retroarch still work on a CRT that has been VGA-modded without installing CRTEmudriver?
I had it set up perfectly on a component-input CRT using this adapter . Unfortunately, the CRT's inputs failed on me and another set has been hard to track down. Intead, I know a guy who does SCART mods and is prepared to do a VGA port instead.
My bigger problem is the PC machine I was using crapped out as well, and testsigning interferes with too much for my main, so I'd have to dual-boot (and would rather not). I'd also rather not have to use a second machine at all, to be honest.
I was reading about EDID emulation on 5xxx cards as a workaround but would that even work with the modded CRT?
Calamity:
chinagreenelvis,
--- Quote ---Would Switchres through Retroarch still work on a CRT that has been VGA-modded without installing CRTEmudriver?
--- End quote ---
Short answer, no.
It will work to a limited extent, but no low resolutions nor dynamic video timings will work, so...
--- Quote ---I was reading about EDID emulation on 5xxx cards as a workaround but would that even work with the modded CRT?
--- End quote ---
I don't understand your question.
EDID emulation is no workaround, but a substantial part of emudriver/vmmaker's operation.
The fact that this is a modded CRT is completely irrelevant from my point of view.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version