Arcade Collecting > Merit/JVL Touchscreen

raidion mobo's

<< < (3/3)

ed12:
thk's shawn
i did all that..
the kicker is i removed the jumper altoghter..and it boots's every time
just like i pointed out with the ion..
so i tested it once again on a machine at the shop,it is on a heat run,
exact same thing,removed jumper..boot error is gone,so i did some chking
bios is going south..
makes me wonder if these thing's did not have built in kill timer's ?

ed

lilshawn:

--- Quote from: ed12 on July 14, 2014, 12:29:37 pm ---makes me wonder if these thing's did not have built in kill timer's ?

--- End quote ---

wouldn't doubt it. "suicide" hardware.

ive also seen the monitor cause issues with the radions. the frikin HD cable runs right overtop of 25kv line... :banghead: you crank up the screen cause the guns are getting weak and the machine starts crashing.  :badmood:

i think we've pulled all our radions off route now. gone by way of dodo. tubes are all crapped out.

Navigation

[0] Message Index

[*] Previous page