Main > Main Forum

Happ Power Pro Molex ?

(1/2) > >>

bimm25e:
So Just bought a new HAPP Power  Pro 20A power supply

http://universalgamecabinetsandparts.com/wp-content/uploads/2013/05/power-supply.jpg

And I'd like to buy the appropriate molex connectors to hookup to my JAMMA harness.  Anyone know what product numbers Im looking for on MOUSER.com  or even better, want to sell me one of each? :)

Nephasth:
Bob  Roberts

Ken Layton:
It looks like you need the male connector housings and male crimp terminals.

Mouser # 538-03-09-2091 Housing, .093" Male, 9 pin

Mouser # 538-03-09-2031 Housing, .093", male, 3 pin

Mouser # 538-02-09-2103 Male crimp terminals, .093"

If you also want to get female halves, here are the numbers:

538-03-09-1091

538-03-09-1081

538-02-09-1104

bimm25e:

--- Quote from: Ken Layton on July 01, 2014, 12:09:35 am ---It looks like you need the male connector housings and male crimp terminals.

Mouser # 538-03-09-2091 Housing, .093" Male, 9 pin

Mouser # 538-03-09-2031 Housing, .093", male, 3 pin

Mouser # 538-02-09-2103 Male crimp terminals, .093"

If you also want to get female halves, here are the numbers:

538-03-09-1091

538-03-09-1081

538-02-09-1104

--- End quote ---




thank you VERY MUCH!!

mgb:
You can also find those connectors at Radio shack. Just make sure they're the correct size

Navigation

[0] Message Index

[#] Next page

Go to full version