Cap Kit lists for Mouser (updated 7/10/15) (now with pics!)

[Sarver Systems]

I'll be modifying the list in a day or 2 if those 2 parts are still on back order.

[Sarver Systems]

Can someone please verify for me which fuse clips to include in the above list?

http://www.mouser.com/ProductDetail/Littelfuse/01110501Z/?qs=sGAEpiMZZMuG%252bgnN5hGYGz%252b7t4SVwK3ZNIPvW%252bavkvQ%3d

or

http://www.mouser.com/ProductDetail/Littelfuse/10207101009/?qs=sGAEpiMZZMuG%252bgnN5hGYG0u12dc35WuVZ36vyla8Ap8%3d

I'm not sure of the orientation of the pins on the fuse clips because I don't have a monitor in front of me at the moment.

[ed12]

either

ed

[Ken Layton]

Electrohome uses the side mount fuse clips.

[Sarver Systems]

Thanks ed.

I went by the Jameco part number listed above, and converted it to the Mouser part number.

[Sarver Systems]

Am I missing anything else in the list that you'd suggest?

I saw mention of 1ohm resistors, but I don't know the wattage, or how many to add to the list.

[ed12]

ya ken
but i have seen 07/08 with both foot print's
that is why i said either

ed

[ed12]

1 ohm 1/2-1watt wire would flame proff.
it is in fact a fuse for the secondary side of the flyback
there i believe is 2 of them >ken correct me here<

ed

[Sarver Systems]

Are we talking about one of these?

http://www.mouser.com/ProductDetail/Vishay-BC-Components/PR01000101008JA100/?qs=sGAEpiMZZMsPqMdJzcrNwqUl9GN6Ib%252bQTn6HJi%2f7pOQ%3d

[ed12]

perty much
it is metal film...make's it flame proff.
if u can find it in 1/2 watt even better

ed

[Sarver Systems]

Updated!

[Sarver Systems]

As you can see, I am slowly bringing on other individual kits as well.

I'll update the lists to include part numbers, location on the chassis, and whatever other info is needed.

I hope I'm not stepping on anyone's toes by doing this, but I didn't see any other up-to-date posts for this.

[Sarver Systems]

I just ordered the bulk kit for myself. I'll take some pics and post them when I receive them.

[Sarver Systems]

The fuse clips are incorrect. Please adjust your cart accordingly until I can get it fixed.

[Sarver Systems]

I added 2 parts to the list.

33uf @ 35V, and 4.7uf @ 250V.

[Dr. Willy]

where did you buy your case/holder for all the capasitors? it looks really cool.

[Sarver Systems]

I would go with this: http://www.harborfreight.com/toolbox-organizer-with-4-drawers-68238-8143.html
Or with this: http://www.harborfreight.com/multi-compartment-utility-box-40528.html

I had to bend the leads on the larger caps to get them to fit in the compartments on the smaller organizer, but nothing major.

[Sarver Systems]

I'm going to swap out those 3 parts that seem to always be on BO for the next update.