Main > Main Forum
Need help with an Xmen 4 player cabinet
redfivexw:
I have an original Xmen 4 player cab, the sound was bad so I ordered a replacement board on ebay. The new board works, but it says to "press start". I have no start buttons, I am wondering if this could be a 2 player version of the game? Can I swap the roms from my original board to the new one? Should I? My original board says version UBB, the replacement says version AEA.
PL1:
Press Button 1 (Attack) -- that should work as start. :cheers:
UBB and AEA are both 4-player versions, not sure what the exact differences are, probably geographic region.
Scott
EDIT: UBB confirmed as the U.S. version and AEA appears to be an Asian or Australian version. :dunno
redfivexw:
I tried the attack button and no dice. Also, the third and fourth joysticks and coin doors are not active. I put this board in a regular jamma cabinet with 2 joysticks, and it works perfect. You put in a quarter, and you can use the joystick to select any player and press start. In my 4p xmen cab, it does not work at all. i have attached the i/o check screen from my original board, it has the check feature for all 4 coin slots. On the AEA board, it only shows 2. I am thinking this board was possibly converted to a 2p.
Malenko:
I believe you need to go into the test menu and change the settings to 4 player, there arent any hardware dipswitches on the board.
redfivexw:
That was my first instinct as well, but there is no option to change it listed, so that is out. I personally think there is probably a different rom on the board for 2p vs 4p, i will do some more research.
Navigation
[0] Message Index
[#] Next page
Go to full version