Main > Main Forum

Installing J-pac controller

(1/1)

jkimrey:
Hi.

After several years after purchasing the J-pac JAMMA board, I am finally trying to get it hooked up to my arcade.

Of course, after so long a delay, I *have* to be missing something. ;)

In this case, it appears to be the PS/2 cable that goes from the computer to the board (I assume it came with one of these, although I don't specifically remember it).

Does anyone know if it is possible to find a replacement cable online?  Would I just need a PS/2 cable with male ends on both sides?

Thanks!

AndyWarne:

--- Quote from: jkimrey on April 20, 2014, 07:18:31 am ---Hi.

After several years after purchasing the i-pac JAMMA board, I am finally trying to get it hooked up to my arcade.

Of course, after so long a delay, I *have* to be missing something. ;)

In this case, it appears to be the PS/2 cable that goes from the computer to the board (I assume it came with one of these, although I don't specifically remember it).

Does anyone know if it is possible to find a replacement cable online?  Would I just need a PS/2 cable with male ends on both sides?

Thanks!

--- End quote ---

Several years

The cable would either have been a male-male PS/2 cable or a DIN to USB cable depending on what you ordered. We can supply the cables and send by mail to minimise shipping. Drop me an email on andy@ultimarc.com

jkimrey:
Email sent Andy.

I also updated the thread to reflect it is a J-Pac, NOT an I-pac.

Thanks

Caparo8bit:


Several years

The cable would either have been a male-male PS/2 cable or a DIN to USB cable depending on what you ordered. We can supply the cables and send by mail to minimise shipping. Drop me an email on andy@ultimarc.com
[/quote] :applaud: thats what i call excelent C. Service.

Navigation

[0] Message Index

Go to full version