Main > Main Forum
Access Panels
SavannahLion:
I prefer front entry. I think some Dynamos came like that in the form of a sort of drawer. In general however, I just do what is appropriate for the cab. If it works better as front, I'll do front. If back is called for I'll do back.
Just do what is called for with your design and try not to sink too much thought into it.
Generic Eric:
--- Quote from: SavannahLion on March 20, 2014, 10:07:41 pm ---I prefer front entry. I think some Dynamos came like that in the form of a sort of drawer. In general however, I just do what is appropriate for the cab. If it works better as front, I'll do front. If back is called for I'll do back.
Just do what is called for with your design and try not to sink too much thought into it.
--- End quote ---
I like the dynamo drawer! h5?
@op
I have a hinge that opens my cp. the back door was supposed to be a wooden frame about 3" that had black screen for open air.
thewisteron:
I decided to cut out a panel on the back side of the cp base. I'll probably cover it with a nice solid piece of 3/8 or 1/2 pine or something similar and route the edges to look good. I'll try a couple of cabinet hinges on the inside. I'll post pics of how it turns out this weekend.
keilmillerjr:
--- Quote from: thewisteron on March 21, 2014, 01:49:50 am ---I decided to cut out a panel on the back side of the cp base. I'll probably cover it with a nice solid piece of 3/8 or 1/2 pine or something similar and route the edges to look good. I'll try a couple of cabinet hinges on the inside. I'll post pics of how it turns out this weekend.
--- End quote ---
I'd route 1" wide by .25" deep around your hole, install 4 t-nuts in each corner, and then get some button hex bolts to attach a .25" deep panel. It's not structural, so I'd save some weight and make things easy. 4 bolts, take the panel off. Done.
thewisteron:
That is a very interesting idea. Have you done this on your cab? I'd love to see an example.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version